How To Make Your Own False Teeth At Home | False Teeth Options (2023)

If you are in need of temporary, natural-looking false teeth and happen to have a tight budget, seeing your dentist right away may not be an option. However, until you are able to make that appointment there are many ways in which to make your own false teeth at home. Several DIY denture methods exist and each is designed to be easy to follow producing good results.

Here we look at several questions that you may have regarding DIY dentures and outline different methods so that you can choose the best method for you.

DIY Denture Benefits – Why Choose DIY False Teeth?

The best part about making dentures at home is that you will end up with temporary false teeth that will cost you a fraction of what you would normally pay for emergency dental repairs through a dental clinic. While that is an attractive reason to go the DIY route, keep in mind that all of the home remedies suggested here are intended purely for temporary relief until you can schedule a visit to your dentist.

Further reading…

• >> Denture Prices – How Much Do Dentures Cost?
• >>

Emergency dental care is costly, and depending on yourspecific needs, you may be able to avoid the initial cost with one of the manyonline options available to you. Plus, when you make your own dentures at homeyou are also saving time. New dentures from your dentist can take severalvisits to complete before your new false teeth fit properly. Homemade ones takeless time.

Although they can be quicker to make than regular full dentures, It is important to note that to create your own dentures, you will need a lot of patience. It can be fiddly getting the look right and this can take some time and patience.

Another of the biggest benefits of creating your own false teeth is that you have complete control over the design and the material that you use. This means that you have the freedom to create something that is comfortable for you and looks natural in your mouth.

DIY dentures are also very easy to remove and don’t require you to have them glued to your teeth. So, if you wish to go out and be social, you can easily put them in and remove them when you come home. You can also easily clean and maintain them yourself. These are just some of the benefits of DIY dentures.

So if you are a bit on the handy side and are in no dire need of emergency dental care, but wish to replace a missing tooth or set of teeth, these false teeth online DIY solutions may be a great option for you. They allow you to quickly and easily create natural-looking false teeth.

Again, remember that you should only utilize homemade denture methods as a means to get by until you can have those missing teeth properly replaced by your local dental professional.

Common Problems Associated With Missing Teeth

First of all, you should know that there are three different types of tooth loss. Some people lose one or more teeth due to an accident, a bad fall, or simply tooth decay. Other people lose teeth due to gum disease, while others may have had teeth extracted due to medical reasons.

Apart from simple aesthetics, missing teeth can have several other repercussions. Here are a few potential problems that may occur as a result of missing teeth.

For starters, missing teeth can make it difficult to chew, speak or smile normally. However, the most serious, and often unexpected, problem with missing teeth is that your jawbone can deteriorate, often leaving you with a sunken-in-looking face. Your overall facial appearance can change drastically when you lose teeth, and people can often tell you’ve experienced a dental problem just by looking at you. All these things can dramatically affect your confidence.

Tooth loss can increase the risk of gum disease. If the teeth are not cared for properly, then bacteria will build up and cause bone loss. This can lead to additional teeth falling out.

Common Problems Associated With Regular Dentures

Full dentures are false teeth that you fit over the jaw bone. They are single or multiple sets of removable teeth that are custom-made. Dentures are not perfect, are not cheap, and can cause some discomfort. Some of the problems that you may experience with full dentures are:

• Some of the problems that you may experience with dentures are:
• You can lose the dentures
• They may fall out, break, or get lost
• You might find it difficult to eat certain foods
• It is difficult to speak clearly
• They can slip around in your mouth
• They are susceptible to staining
• They can make your lips and cheeks sore
• You may have trouble chewing foods
• Because dentures do not fit as well as your natural set of teeth, they are also more difficult to clean.

DIY Denture Options

DIY dentures do not have many of the problems listed above. For example, if you lose or damage a DIY denture, it might be a bit of an inconvenience, but you can quite easily just make another one (without it costing a fortune!).

Here are a few ways to make your own dentures at home:

Make Your Own Dentures Kit with DVD

The first method showing you how to make dentures at home comes from Garry Rhyne. He has devised an eight-step process that will produce a great temporary false tooth at a cost of about $25. This process uses materials you already have in your home.

The process involves making an impression of your gums where you will be placing the finished dentures. This mold is then cast into plaster. With teeth that Gary sends you (that you will pre-order), you place them on the plaster cast of your jaw using wax.

The next step is to actually insert them to see how they fit. This is where you make adjustments required to ensure they align with existing teeth. You would also confirm that you can bite properly with them and see how the color matches your existing teeth.

The final steps actually create your new dentures once you set the plaster cast into acrylic. What you will end up with is a completely homemade, custom-fit set of dentures. You will be able to wear these new dentures the same as you would a professionally constructed set.

The difference here is that when you make your own false teeth at home you will save about 90 percent of the cost of false teeth your dentist can make.

Unfortunately, it seems that this product is not for sale anymore 🙁 However, we will keep an eye out for it and if it becomes available again, we will post more information here.

DIY Dentures At Home

This is a similar method to the one noted above as itinvolves using plaster. However, if you are rather accomplished in DIYsituations, this may be the best choice for your skills. Before we get to thesteps in the process, you will need the following list of materials:

• Alginate
• Plaster of Paris
• Self-curing dental acrylic powder
• Self-curing dental acrylic monomer
• Acrylic teeth sets
• A small piece of stainless steel wire (for braces)
• Dental trays (upper and lower)
• Blu Tack
• Additional acrylic teeth (from a kit)

Additional materials to make your own dentures at homeinclude:

• A small mixing bowl(ceramic or stainless steel)
• A mixing fork and spoon
• Small brushes
• Power angle grinder
• Power drill with stonegrinders
• Tight-fitting rubbergloves
• Butter

Step 1 – Taking Algenate NegativeImpression

Mix the powder alginate with water to produce a stiff, gooey mixture. Place in the dental tray you intend to use first. Be sure to mix enough to completely fill the tray.

Insert the tray into your mouth. You may have to push aside your lips with your fingers in order to get the tray completely in position. Push the tray over your teeth to ensure a good impression.

Hold the tray in place for about 30 seconds or until the mixture hardens. Carefully and slowly pull the tray off of your teeth. This will be your negative mold.

Step 2 – Creating A Positive Mold

Carefully brush a small amount of butter into the alginate negative. Build a small dam around the entire mold so that when you add plaster it can fill the mold completely.

Mix up some Plaster of Paris with water into a thinbut smooth paste. Carefully pour the plaster mixture into the negative moldstirring with a toothpick to remove air bubbles as you go.

Let the plaster set, which may take just over an hour. Once the plaster has set, carefully remove your dam and then remove the negative mold from the dental tray.

As soon as the molds are out of the dental tray, youshould be able to gently separate the positive mold from the negative mold. Thelayer of butter will keep them from sticking together.

Step 3 – Making The Base Plate

Wearing tight rubber gloves, mix the dental acrylic powder and monomer together. As this will set in about 5 minutes you need to move quickly on the step.

After the mixture has been made, apply a very thincoating of this to the palate and gums of your positive mold. Continue to pressthe acrylic into all parts of the mold.

Allow the acrylic to harden. Then set it by heating the covered mold by dipping it in a pot of boiling water. Leave it at boiling temperature for about 10 minutes.

Step 4 – Cleaning The Base Plate

After the acrylic has cured, you can remove the baseplate from the positive mold. Smooth down any rough edges with your anglegrinding tools.

Apply a thin strip of Blu Tack on the base plate whereyou are going to build up gums and teeth. With acrylic teeth that you havepurchased from a kit, start to apply them to the base plate where you aremissing natural teeth.

Add another strip of Blu Tack to the inside and backof those teeth to hold them in place. As soon as you have completed adding theextra teeth, your denture plate is complete and ready to wear!

For a complete and detailed outline of all these steps, click here.

The $12 False Teeth Kit

Another method to make your own false teeth at home will cost about $12 and take about an hour to finish. The main material used is polymorph beads which you can buy at art supply stores.

You add the beads to a glass of hot water. This melts them down to a clear plastic blob that you remove from the water and roll into a ball with your fingers. You then flatten the ball out and insert it into your mouth behind your back teeth.

The next thing you do is bite down on the flattened material, holding it in place with your tongue. This makes an impression of the gap where the tooth goes. The key to this whole process is using a warmed butter knife (dipped frequently in the hot water) to slowly shape the teeth. The plastic melts and allows you to mold it into the shape of teeth.

For proper sizing, insert the false teeth and continue to form them with your tongue and fingers. This helps to smooth it out and match the size and alignment of existing teeth.

Once this fitting is complete, remove the false teeth and trim the excess plastic with scissors while it is still soft enough to shape. Follow this up with more shaping with the warm butter knife until you are satisfied with the look and fit.

These are only meant for use as temporary false teeth.

See more about this method in this video…

How to Make Your Own False Teeth for $5

The third method used to make false teeth is by using a false teeth kit that will cost about $5. This method should take around 30 minutes to complete.

This DIY dentures method involves using dental wax that you can buy in the dental aisle at your local drugstore. Dental wax is often used to protect cheeks from excess damage while wearing braces.

For more information on dental wax, click here.

Other materials needed to make your own false teeth at home include a package of crayons (with one white one) and a white candle.

Using a metal tablespoon over a lit candle, melt the dental wax. On top of this, melt the wax of another white candle and add it to the mixture. You add the extra candle wax since the dental wax will not be firm enough to form into teeth. Add no more than 10 or 15 percent candle wax.

You can use crayons to add color to the teeth. By melting a little bit of a white, brown, and yellow crayon, you will be able to match the color of your existing teeth. Once you reach the desired color, pour the melted mixture back into the plastic container the dental wax came with and allow it to cool.

Once this has cooled, remove part of the wax and shape it to look like teeth. Use your fingers and a sharp knife while the wax is still soft enough to shape. Insert it into your mouth once cooled enough to not burn your gums and use this as a fitting. Continue to shape and smooth until it looks like your other teeth.

Use only as a temporary false teeth solution.

Temptooth Temporary Tooth Replacement Product – with FREE dental tools

(Video) Crafting Home Made Dentures - Do It Yourself Dentures Full Tutorial - denturi.com

Another method for creating a temporary replacement tooth is to use the Temptooth product. Like the method above, you melt a small portion of the product and form it into the shape of your tooth. It comes as beads that you melt in hot water.

Since you are melting the product in hot water, you must take care to avoid burning yourself.

When the product cools and hardens, it turns white to match the rest of your teeth. You are also able to color the product so that it better matches the color of your existing teeth. You do this so that it does not stand out too much from the others.

For more details on the Temptooth product, click here.

Make sure that you check out the video below for more information on how to make dentures at home. And for further information on dentures and fake teeth options, check out these posts:

• Realistic Fake Teeth Options
• How To Repair A Broken Denture
• What Are The Best False Teeth Glue Options?
• What Are The Best Denture Reliners?

Advantages/Disadvantages when Making Your Own False Teeth at Home

The obvious advantage of using a DIY false teeth kit to make natural-looking false teeth is affordability. The cost is minimal and the results can be good.

They also need little time commitment. This means that if you lose a tooth and have a social event to attend in the evening, you will be able to create a temporary replacement false tooth option with little effort.

The disadvantages include that they are mostly intended for emergency repairs and not as permanent replacements. You also need to be a little bit creative when it comes to the actual forming and shaping of the mixtures into teeth.

Otherwise, these are simple false teeth online solutions that will help you to make your own false teeth at home.

Conclusion

If you have an issue that requires you to have false teeth, and you do not have the money to see a dentist right away, you may be looking for a fast, effective way to make a temporary denture. While there are plenty of options out there, we hope that you will find the information above on how to make your own false teeth at home helpful.

Being able to make your own false teeth at home can be a great solution, keep in mind that all of these home remedies are intended for temporary relief until you can schedule a visit to your dentist.

Have you had any experience with making your own false teeth at home? What method did you use? How did it work for you? Please share your experience to help others in similar situations in the comments below…

More From My Site